1. KVM Demo Images

These images are available when the agl-kvm feature is given to aglsetup.sh. The resulting images use DHCP for network configuration, but the following address assignments are assumed:

Note that all of the KVM demo images are currently configured for the Renesas H3ULCB based AGL reference hardware. While the demo can likely be run on other hardware, there are some pieces of configuration that are currently hard-coded that would need to be changed. One particular aspect of hardware-specific configuration is that the USB connection for the touchscreen used for the IVI needs to be plugged into the lower USB connector of the 2x USB 3.0 connector header on the reference hardware.

agl-ivi-demo-flutter-guest

Flutter IVI demo image with:

agl-cluster-demo-flutter-guest

Flutter IC demo image with:

agl-kvm-demo

Base KVM demo image with:

2. Preconfigured KVM demo images

These images are also available when the agl-kvm feature is given to aglsetup.sh, but are intended for use with a more complete demo setup along the lines of what the project showcases at tradeshows such as CES or Embedded World. The resulting images use DHCP for network configuration, but the following address assignments are assumed:

agl-ivi-demo-flutter-guest-preconfigured

Flutter IVI demo image with:

agl-ivi-demo-flutter-guest-preconfigured-gateway

Flutter IVI demo image with:

agl-cluster-demo-flutter-guest-preconfigured

Flutter IC demo image with:

agl-cluster-demo-flutter-guest-preconfigured-gateway

Flutter IC demo image with:

agl-kvm-demo-flutter-preconfigured

KVM demo image with:

agl-kvm-demo-flutter-preconfigured-gateway